|

|  How to Implement CAN Bus Communication in Embedded Systems

How to Implement CAN Bus Communication in Embedded Systems

October 30, 2024

Master CAN Bus communication in embedded systems with a comprehensive guide for hardware developers, covering essential concepts and practical steps.

How to Implement CAN Bus Communication in Embedded Systems

 

Introduction to CAN Bus

  • CAN (Controller Area Network) bus is a robust communication protocol that allows microcontrollers and devices to communicate without a host computer.
  • It's widely used in automotive and industrial applications due to its high reliability and real-time capabilities.

 

CAN Bus Architecture in Embedded Systems

  • Typically consists of two wires, CAN_H (high) and CAN_L (low), that form a twisted pair for differential signaling, which minimizes electromagnetic interference.
  • Each node on the network can send and receive messages, and all nodes see each message transmitted on the network.

 

Choosing the Right Controller

  • Select a microcontroller with an integrated CAN controller or use an external CAN controller like the MCP2515 for microcontrollers that do not have it built-in.
  • Ensure the transceiver matches your application's voltage levels and compatibility requirements.

 

Hardware Setup

  • Connect the CAN transceiver to your microcontroller (e.g., TX and RX lines to the CAN_H and CAN_L lines).
  • Use a standard connector like DB9 or OBD-II for devices that require compliance with specific standards.
  • Implement termination resistors (typically 120 ohms) at each end of the CAN bus to minimize signal reflections.

 

Software Implementation

  • Initialize the CAN controller by setting up the baud rate and other CAN configuration settings.
  • Implement message framing that includes setting up identifiers and data frames. CAN 2.0A uses 11-bit IDs, while CAN 2.0B uses 29-bit IDs.
// Example for setting up CAN on an STM32F407
CAN_HandleTypeDef hcan1;

void CAN_Config(void) {
    hcan1.Instance = CAN1;
    hcan1.Init.Prescaler = 16;
    hcan1.Init.Mode = CAN_MODE_NORMAL;
    hcan1.Init.SJW = CAN_SJW_1TQ;
    hcan1.Init.BS1 = CAN_BS1_8TQ;
    hcan1.Init.BS2 = CAN_BS2_1TQ;
    hcan1.Init.TTCM = DISABLE;
    hcan1.Init.ABOM = DISABLE;
    hcan1.Init.AWUM = DISABLE;
    hcan1.Init.NART = DISABLE;
    hcan1.Init.RFLM = DISABLE;
    hcan1.Init.TXFP = DISABLE;

    if (HAL_CAN_Init(&hcan1) != HAL_OK) {
        // Initialization Error
        Error_Handler();
    }
}

 

Message Transmission and Reception

  • To send a message, configure and load a transmission mailbox with appropriate message IDs and data length.
  • Reception involves interrupt service routines or polling to capture messages from receive mailboxes.
// Transmit a CAN message
CAN_TxHeaderTypeDef TxHeader;
uint32_t TxMailbox;
uint8_t TxData[8];

TxHeader.StdId = 0x321; // Standard ID
TxHeader.ExtId = 0x01;  // Extended ID
TxHeader.RTR = CAN_RTR_DATA;
TxHeader.IDE = CAN_ID_STD;
TxHeader.DLC = 2;
TxHeader.TransmitGlobalTime = DISABLE;

TxData[0] = 0xAB;
TxData[1] = 0xCD;

if (HAL_CAN_AddTxMessage(&hcan1, &TxHeader, TxData, &TxMailbox) != HAL_OK) {
    // Transmission request Error
    Error_Handler();
}

// Receive a CAN message
CAN_RxHeaderTypeDef RxHeader;
uint8_t RxData[8];

if (HAL_CAN_GetRxMessage(&hcan1, CAN_RX_FIFO0, &RxHeader, RxData) != HAL_OK) {
    // Reception Error
    Error_Handler();
}

 

Data Handling and Filtering

  • Implement message filtering to process only those messages relevant to your application, reducing CPU overhead and improving efficiency.
  • Utilize interrupts to handle message reception promptly, especially in high-speed or time-critical applications.

 

Testing and Debugging

  • Use an oscilloscope to verify signal integrity and voltage levels on the CAN bus lines.
  • Leverage software tools like a CAN bus analyzer or toolchains (e.g., SocketCAN for Linux) for message testing and validation.

 

Conclusion

  • CAN bus implementation in embedded systems involves both hardware integration and software configuration.
  • Adhering to the guidelines on setup, configuration, and debugging ensures a robust communication setup suitable for various applications.

Pre-order Friend AI Necklace

Pre-Order Friend Dev Kit

Open-source AI wearable
Build using the power of recall

Order Now

OMI AI PLATFORM
Remember Every Moment,
Talk to AI and Get Feedback

Omi Necklace

The #1 Open Source AI necklace: Experiment with how you capture and manage conversations.

Build and test with your own Omi Dev Kit 2.

Omi App

Fully Open-Source AI wearable app: build and use reminders, meeting summaries, task suggestions and more. All in one simple app.

Github →

Join the #1 open-source AI wearable community

Build faster and better with 3900+ community members on Omi Discord

Participate in hackathons to expand the Omi platform and win prizes

Participate in hackathons to expand the Omi platform and win prizes

Get cash bounties, free Omi devices and priority access by taking part in community activities

Join our Discord → 

OMI NECKLACE + OMI APP
First & only open-source AI wearable platform

a person looks into the phone with an app for AI Necklace, looking at notes Friend AI Wearable recorded a person looks into the phone with an app for AI Necklace, looking at notes Friend AI Wearable recorded
a person looks into the phone with an app for AI Necklace, looking at notes Friend AI Wearable recorded a person looks into the phone with an app for AI Necklace, looking at notes Friend AI Wearable recorded
online meeting with AI Wearable, showcasing how it works and helps online meeting with AI Wearable, showcasing how it works and helps
online meeting with AI Wearable, showcasing how it works and helps online meeting with AI Wearable, showcasing how it works and helps
App for Friend AI Necklace, showing notes and topics AI Necklace recorded App for Friend AI Necklace, showing notes and topics AI Necklace recorded
App for Friend AI Necklace, showing notes and topics AI Necklace recorded App for Friend AI Necklace, showing notes and topics AI Necklace recorded

OMI NECKLACE: DEV KIT
Order your Omi Dev Kit 2 now and create your use cases

Omi Dev Kit 2

Endless customization

OMI Necklace

$69.99

Make your life more fun with your AI wearable clone. It gives you thoughts, personalized feedback and becomes your second brain to discuss your thoughts and feelings. Available on iOS and Android.

 

Your Omi will seamlessly sync with your existing omi persona, giving you a full clone of yourself – with limitless potential for use cases:

  • Real-time conversation transcription and processing;
  • Develop your own use cases for fun and productivity;
  • Hundreds of community apps to make use of your Omi Persona and conversations.

Learn more

Omi Dev Kit 2: build at a new level

Key Specs

OMI DEV KIT

OMI DEV KIT 2

Microphone

Yes

Yes

Battery

4 days (250mAH)

2 days (250mAH)

On-board memory (works without phone)

No

Yes

Speaker

No

Yes

Programmable button

No

Yes

Estimated Delivery 

-

1 week

What people say

“Helping with MEMORY,

COMMUNICATION

with business/life partner,

capturing IDEAS, and solving for

a hearing CHALLENGE."

Nathan Sudds

“I wish I had this device

last summer

to RECORD

A CONVERSATION."

Chris Y.

“Fixed my ADHD and

helped me stay

organized."

David Nigh

OMI NECKLACE: DEV KIT
Take your brain to the next level

LATEST NEWS
Follow and be first in the know

Latest news
FOLLOW AND BE FIRST IN THE KNOW

San Francisco

team@basedhardware.com
Title

Company

About

Careers

Invest
Title

Products

Omi Dev Kit 2

Openglass

Other

App marketplace

Affiliate

Privacy

Customizations

Discord

Docs

Help