How to fix Vantrue Dash Cam loop recording issues?

Understand Loop Recording Issues

• Loop recording is a feature that enables continuous recording by overwriting the oldest files when the memory card is full.

 

• If your Vantrue Dash Cam is experiencing issues with loop recording, it might stop recording altogether or fail to overwrite the oldest files.

Check Your Memory Card

• Ensure you are using a high-quality, Class 10 or above memory card with adequate storage capacity, as lower-class cards may not handle data properly.

 

• Format the memory card using the dash cam's format function rather than a computer to ensure it uses the correct file system.

Adjust Dash Cam Settings

• Make sure loop recording is enabled in the camera settings. Verify that the duration is set correctly, generally at 3, 5, or 10 minutes.

 

• Disable any features that might be preventing loop recording, such as G-sensor or parking mode, which may protect files and prevent them from being overwritten.

Update Firmware

• Check for any available firmware updates for your Vantrue Dash Cam. Manufacturers often release updates to fix bugs and improve performance.

 

• Follow the manufacturer's instructions for updating the firmware carefully, using the correct firmware for your specific model.

Test and Monitor Performance

• After making adjustments, test the dash cam's loop recording by driving for a period and reviewing the footage to ensure it's functioning properly.

 

• Continuously monitor the performance over several days to confirm that the loop recording issue is resolved.