How to reset Rad Power Bike’s display?

Resetting the Rad Power Bike Display

• Turn on your Rad Power Bike by ensuring the battery is connected and the main power switch is set to "On".

 

• Locate the mode button, often marked "MODE" or featuring a power symbol, situated on the front or side of your display unit.

 

• Press and hold the mode button for about 5 to 10 seconds to initiate a reset, until the display screen powers down completely.

 

• Release the button. Wait a few seconds before pressing the mode button again to power the display back on. This action should reset the display settings to default.

Fixing Display Problems

• If the reset does not solve the issue, check the connections and wiring between the display and the bike. Look for loose connectors or frayed wires, and ensure everything is securely attached.

 

• Inspect the battery to ensure it’s charged. A low battery might prevent the display from functioning correctly. Charge the battery fully and check again.

 

• Test the display by swapping it with another functioning display unit, if available, to see if the issue lies with the display itself or another component.

 

• If problems persist, consult the Rad Power Bikes support team or refer to their user manual for detailed troubleshooting steps related to your model.