How to pair Arlo floodlight with camera hub

Prepare Your Devices

• Ensure the Arlo floodlight and camera hub are properly charged or connected to a power source.

 

• Make sure you have a stable Wi-Fi connection. It's crucial for the pairing process.

 

• Install the latest version of the Arlo app on your smartphone or tablet.

Connect Your Camera Hub to Wi-Fi

• Open the Arlo app on your device.

 

• Navigate to the "Devices" section within the app.

 

• Select the camera hub from the list and follow the prompts to connect it to your Wi-Fi network.

 

• Ensure that the hub’s firmware is updated to the latest version.

Pair the Floodlight with the Camera Hub

• In the Arlo app, go to the "Settings" menu and select "Add Device".

 

• Choose "Floodlight" from the list of device types.

 

• Press the sync button on the floodlight. Wait for the LED to start blinking, indicating it is ready to pair.

 

• Follow the in-app instructions to complete the pairing process. This usually involves waiting for the app to detect the floodlight and confirming the connection.

Troubleshooting Common Problems

• If the floodlight won't pair, try moving it closer to the camera hub to ensure they are within range.

 

• Restart the floodlight and hub by powering them off and back on. Re-attempt the pairing process afterward.

 

• Check the battery level or power connection of the floodlight. Low power may affect syncing.

 

• Ensure there are no obstructions or interference from other electronic devices that might affect wireless connectivity.

 

• If all else fails, contact Arlo support for assistance. They can provide additional troubleshooting steps tailored to your problem.