Identify the Cause of Feedback Noise
- Feedback in hearing aids usually occurs when amplified sound from the hearing aid's speaker makes its way back into the microphone, causing a loop.
- Common causes include poorly fitted earmolds, earwax buildup, or the hearing aid being set at too high a volume.
Check the Fit of Your Hearing Aid
- Ensure that the hearing aid and earmold are inserted correctly. A loose fit can allow sound to escape, which may cause feedback.
- If the hearing aid feels loose or uncomfortable, consider visiting your hearing care provider for adjustments.
Inspect for Earwax Blockage
- Earwax can cause feedback by blocking the sound path, making it important to keep your ears and hearing aids clean.
- Check for visible earwax in your ears and around the hearing aid, and clean them as recommended by your hearing care provider.
Adjust the Volume
- If your hearing aid is set too loud, try turning the volume down to see if it reduces feedback noise.
- Consider consulting with your hearing care provider to adjust the device's settings to an appropriate level.
Utilize Feedback Management Features
- Modern Signia hearing aids often have feedback cancellation features. Ensure these settings are activated, which can help manage and reduce unwanted noise.
- If you are uncertain how to activate these features, refer to your hearing aid manual or consult your hearing care provider.
Consult Your Hearing Care Provider
- If feedback issues persist, schedule a visit with your hearing care professional. They can perform checks and tune your hearing aids appropriately.
- Your provider may also offer custom earmolds or other solutions to address prolonged feedback noise.
