Replacing the AirTag Battery
Replacing the battery in an AirTag is a simple process that requires a bit of care. The AirTag uses a common CR2032 lithium coin battery. Here's how you can replace it carefully:
- Ensure you have a replacement CR2032 battery ready. It's advisable to purchase a branded battery for reliability.
- Hold the AirTag with the stainless steel side facing down.
- Use your fingers to press down on the polished stainless steel cover.
- Twist the cover counterclockwise with your fingers. You should feel it rotate slightly to release.
- Remove the cover gently and lift out the old battery.
- Insert the new CR2032 battery with the positive side (the side with the “+” sign) facing upwards.
- Realign the cover over the battery.
- Press down on the cover and rotate it clockwise until it clicks securely into place.
Troubleshooting the AirTag Battery Replacement
If you encounter any issues with the AirTag after replacing the battery, consider these tips:
- Ensure the new battery is positioned correctly. The positive side should face upwards.
- Double-check that the battery cover is tightly secured. If it's loose, the battery may not make proper contact.
- Verify that you are using a new and working battery. Sometimes, new batteries can be faulty, so testing with another new one can help.
- If the AirTag still doesn't work, try removing the battery and place it back again to ensure proper alignment.
By following these steps, your AirTag should operate smoothly with a new battery installed. If issues persist, it might be useful to consult Apple support for further assistance.
