Calibrating Belkin Wemo Dimmer Switch
- **Install the Wemo App**: First, ensure you have the Wemo App installed on your smartphone or tablet. It is available on both the Apple App Store and Google Play Store. Make sure your app is updated to the latest version for optimal performance.
- **Connect Your Dimmer Switch**: Ensure the Wemo Dimmer is connected and properly installed in your electrical circuit. The switch should be turned on with the LED indicator light solid or blinking, indicating it's ready to configure.
- **Launch the Wemo App**: Open the app on your smartphone or tablet. You should see a list of devices. If your dimmer switch is not listed, follow the app's instructions to add it.
- **Access the Dimmer Settings**: Once your Wemo Dimmer appears in the app, tap on it to open the device settings. You will see various options related to the dimmer’s functionality.
- **Select Calibration Option**: Within the dimmer settings, look for the ‘Calibrate’ option. It might be under different headings depending on the app version, such as 'Device Settings' or 'Advanced Settings'.
- **Follow Calibration Instructions**: Tap the ‘Calibrate’ button. The app will provide step-by-step instructions to adjust the dimmer light output. This typically involves checking the dimmer's response to sliding adjustments and confirming the light range (minimum and maximum brightness levels).
- **Test the Dimmer**: After calibration, test the dimmer's performance to ensure it works smoothly across the range. Physically adjust the dimmer on the switch as well and see if it corresponds correctly to the light changes displayed.
- **Repeat if Necessary**: If you encounter discrepancies in dimming, repeat the calibration process. Ensure there is no interference or installation issues affecting performance.
Common Issues and Solutions
- **Unresponsive Dimmer**: If the dimmer is unresponsive, check your device’s Wi-Fi connection, and ensure the dimmer is powered and correctly installed. Restart the app and try again.
- **App Cannot Find Dimmer**: Ensure your smartphone is on the same Wi-Fi network as the dimmer. Also, check for updates to the Wemo App and restart your phone if needed.
- **Calibration Not Saving**: Make sure you complete all steps in the app and confirm the calibration settings before exiting. If problems persist, reset the dimmer and redo the entire setup process via the app.
