Prepare Your Devices
- Ensure the Arlo floodlight and camera hub are properly charged or connected to a power source.
- Make sure you have a stable Wi-Fi connection. It's crucial for the pairing process.
- Install the latest version of the Arlo app on your smartphone or tablet.
Connect Your Camera Hub to Wi-Fi
- Open the Arlo app on your device.
- Navigate to the "Devices" section within the app.
- Select the camera hub from the list and follow the prompts to connect it to your Wi-Fi network.
- Ensure that the hub’s firmware is updated to the latest version.
Pair the Floodlight with the Camera Hub
- In the Arlo app, go to the "Settings" menu and select "Add Device".
- Choose "Floodlight" from the list of device types.
- Press the sync button on the floodlight. Wait for the LED to start blinking, indicating it is ready to pair.
- Follow the in-app instructions to complete the pairing process. This usually involves waiting for the app to detect the floodlight and confirming the connection.
Troubleshooting Common Problems
- If the floodlight won't pair, try moving it closer to the camera hub to ensure they are within range.
- Restart the floodlight and hub by powering them off and back on. Re-attempt the pairing process afterward.
- Check the battery level or power connection of the floodlight. Low power may affect syncing.
- Ensure there are no obstructions or interference from other electronic devices that might affect wireless connectivity.
- If all else fails, contact Arlo support for assistance. They can provide additional troubleshooting steps tailored to your problem.
