Target user / build: developer-focused
DevKit; requires manual assembly (3D-printed parts + wiring + firmware flashing)
MCU / main board: Seeed Studio XIAO ESP32 S3 Sense
SoC family: ESP32-S3
Camera: integrated camera on XIAO ESP32 S3 Sense board
Power (batteries):
- 6 × 150 mAh LiPo batteries (main supply)
- 1 × 250 mAh LiPo battery (additional)
Mechanical / enclosure: 3D-printed mount/case (STL files in hardware folder)
Hinges: standard glasses hinges
Power switch: not included in the “current design” referenced in your text (design may vary by revision)
Firmware tooling: Arduino IDE (or arduino-cli) - ESP32 board package via Espressif Arduino core
PSRAM setting: OPI PSRAM (per setup steps)
Software stack: Expo project; Node tooling (npm or yarn)
Repo path: omi/OmiGlass within https://github.com/BasedHardware/omi
Water-resistant: No